PD6322

Dual 12-inch 3-Way Horn-Loaded Speaker with 60° x 40° Horn

The PD6322 Precision Directivity full range, three-way loudspeakers are designed for applications requiring high output sensitivity with excellent pattern control. They can be utilized standalone in demanding music or speech systems where low frequency extension to 40 Hz is required.

Continuous (RMS): 1,600 W; CONTINUOUS (RMS)
Peak power: 6,400 W; PEAK POWER
Max SPL: 141 dB; MAX SPL
Frequency range: 41 Hz – 17 kHz; FREQUENCY RANGE

Supplied and supported in Pakistan by KYAF, the official HARMAN Professional distributor.

AT A GLANCE

Specifications

1,600 W
Continuous (RMS): 6,400 W
Peak power: 141 dB
Max SPL: 41 Hz – 17 kHz
Frequency range: 2 x 2206H 300 mm
Low-frequency driver: 2432H, 38 mm
High-frequency driver: 4 ohms
Impedance: 77 kg
Weight

Frequency Range (-10 dB)	41 Hz to 17 kHz
Frequency Response (±3 dB)	49 Hz to 15 kHz
Coverage Pattern	/43: 40° x 30°/64: 60° x 40°/66: 60° x 60°/95: 90° x 50°
Crossover Modes	Tri-amp / Bi-amp (passive mid-high) switchable
Passive Crossover	6th order (36 dB/oct) Linkwitz-Riley HP & LP, 1.5 kHz
Transducer Power Rating (AES)	LF: 1600 W (6400 W peak), 2 hrs. 1200 W (4800 W peak), 100 hrs MF: 350 W (1400 W peak), 100 hrs HF: 75 W (300 W peak), 2 hrs
System Power Rating	LF: 1200 W (4800 W peak) MF/HF: 300 W (1200 W peak), 100 hrs
Maximum SPL (1m)	Tri-amp mode: LF: 128 dB-SPL cont avg (134 dB peak) MF: 135 dB-SPL cont avg (141 dB peak) HF: 135 dB-SPL cont avg (141 dB peak) Passive mode: 135 dB-SPL cont avg (141 dB peak)
System Sensitivity (1w @ 1m)	Passive Mode: 110 dB-SPL (mid/high section only)
LF Driver	2 x 2206H 300 mm (12 in) driver with 100 mm (4 in) voice coil
MF Driver	CMCD-82H cone midrange compression driver with integral 200 mm (8 in) diameter Differential Drive® dual 75 mm (3 in) voice coil driver
HF Driver	2432H, 38 mm (1.5 in) exit compression driver with 75 mm (3 in) voice coil
Enclosure	Trapezoidal with 12.5 degree side angles, 16 mm (.625 in) exterior grade 11-ply Finnish birch plywood.
Suspension Attachment	20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware (eyebolts NOT included, see optional accessories).
Finish	Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions	WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements. WRX for direct exposure or extreme environments, such as tropical or beach, or in areas with salt air, extreme high humidity or rapid changes in temperature.
Grille	Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam backing (grille cloth backing on white units)
Input Connectors	Neutrik Speakon® NL8, plus CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop through.
Environmental	Mil-Std 810; IP-x3 per IEC529
Dimensions (H x W x D in vertical orientation)	991 x 673 x 897 mm (39.0 x 26.5 x 35.3 in)
Net Weight	77 kg
Optional Accessories	229 – 00009 – 01 kit of three M10 x 35 mm forged shoulder steel eyebolts
Nominal Impedance	4 ohms (2 x 8 ohms, internally wired in parallel)
Nominal LF Driver Impedance	4 ohms (2 x 8 ohms, internally wired in parallel)
Nominal MF Driver Impedance	8 ohms
Nominal HF Driver Impedance	8 ohms

	PD6322	AWC 82
Frequency Range (-10 dB)	41 Hz to 17 kHz	80 Hz – 20 kHz
Frequency Response (±3 dB)	49 Hz to 15 kHz	100 Hz – 20 kHz
Coverage Pattern	/43: 40° x 30°/64: 60° x 40°/66: 60° x 60°/95: 90° x 50°	120° x 120°
System Power Rating	LF: 1200 W (4800 W peak) MF/HF: 300 W (1200 W peak), 100 hrs	250 W 2 hrs. 200 W 100 hrs
Maximum SPL (1m)	Tri-amp mode: LF: 128 dB-SPL cont avg (134 dB peak) MF: 135 dB-SPL cont avg (141 dB peak) HF: 135 dB-SPL cont avg (141 dB peak) Passive mode: 135 dB-SPL cont avg (141 dB peak)	Direct 8Ω: 118 dB (peaks of 124 dB) 200 W Tap: 117 dB
Nominal Impedance	4 ohms (2 x 8 ohms, internally wired in parallel)	8 ohms
LF Driver	2 x 2206H 300 mm (12 in) driver with 100 mm (4 in) voice coil	Kevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil.
HF Driver	2432H, 38 mm (1.5 in) exit compression driver with 75 mm (3 in) voice coil	25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.
Enclosure	Trapezoidal with 12.5 degree side angles, 16 mm (.625 in) exterior grade 11-ply Finnish birch plywood.	ABS with Glass enclosure, heavily braced
Grille	Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam backing (grille cloth backing on white units)	Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
Environmental	Mil-Std 810; IP-x3 per IEC529	IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs).
Crossover Modes	Tri-amp / Bi-amp (passive mid-high) switchable	Passive
Nominal LF Driver Impedance	4 ohms (2 x 8 ohms, internally wired in parallel)	8 ohms
Suspension Attachment	20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware (eyebolts NOT included, see optional accessories).	Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.