Control 88M

Name: JBL Professional Control 88M
Brand: JBL Professional
SKU: CONTROL 88M

Two-Way 8 inch (200mm) Coaxial Mushroom Landscape Speaker

KYAF code CONTROL 88M

Designed for outdoor applications, the highly weather resistant Control 80 Series Landscape speakers provide excellent full-range sound quality and 360 degree coverage. Designed to be mounted on or in the ground, Control 80 Series Landscape speakers can be used in a wide variety of applications including shopping malls, theme parks, sports venues, hotels, casinos, resorts, restaurants, hospitality and leisure venues, entrance ways, and anywhere a high quality music and/or paging speaker landscape speaker is required. Compact in design, the speaker is unobtrusive and easily blends in with its surroundings. A tough polyethylene enclosure resists abuse from lawn care equipment and the elements, and the enclosure color extends throughout the material so the speaker will maintain color even when scraped or scratched.

Continuous (RMS): 120 W; CONTINUOUS (RMS)
Peak power: 480 W; PEAK POWER
Max SPL: 108 dB; MAX SPL
Frequency range: 47 Hz – 16 kHz; FREQUENCY RANGE

Request a quote Spec sheet PDF · 2.36 MB

Supplied and supported in Pakistan by KYAF, the official HARMAN Professional distributor.

AT A GLANCE

Specifications

120 W
Continuous (RMS): 480 W
Peak power: 108 dB
Max SPL: 47 Hz – 16 kHz
Frequency range: 360° H, 160° V
Coverage: 87 dB, 1W @ 1m
Sensitivity: 8Ω
Impedance: 7.8 kg
Weight

Frequency Range (-10 dB)	47 Hz – 16 kHz
Power Rating	240 W Continuous Program (2 hrs) 120W (480W peak), Continuous Pink Noise (2 hrs) 100W (400W peak) Continuous Pink Noise (100 hrs)
Transformer Taps	70V: 60W, 30W, 15W & 7.5W 100V: 60W, 30W, 15W
Frequency Response (±3 dB)	60Hz - 15 kHz
Maximum Input Voltage	28.0 V
Sensitivity	87 dB, 1W @ 1m (ave. 80Hz - 16kHz)
Coverage Pattern	360° H, 160° V (primary listening 10° to 50° up from ground)
Directivity Factor (Q)	2.1
Directivity Index (DI)	3.2 dB
Maximum SPL (1m)	108 dB
Impedance	8Ω (at 8Ω setting)
Minimum Impedance	6.6Ω at 9.5kHz
Insertion Loss	<0.5 dB at any tap setting
Thru Setting	8Ω nominal
Crossover Type	2nd Order LPF on LF and 2nd Order HPF on HF
Recommended Protective High-Pass	45 Hz for 8Ω operation, 24 dB/oct 80 Hz for 60W tap, 24 dB/oct 50 Hz for 30W, 7.5W, and 7.5W taps, 24 dB/oct
Drivers	LF: 200 mm (8.00 in) diameter LF driver, Kapton™ former, 38mm (1.5 in) voice coil, polypropylene cone and polyurethane surround. HF: 25mm (1.0 in) diameter HF driver Polyetherimide (PEI) dome.
Enclosure	LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.
Grille	Powder coated stainless steel.
Outdoor Capability	IP-56 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.
Safety Agency	UL1480, Transformer UL Recognized per UL1876, ROHS compliant.
Input Connectors	Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section)
Wiring	Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For Installation instructions, see Installation Guide (#IS-C80MLS).
Colors	Hunter Green, RAL6018
Dimensions (H x W x D)	524 x 355 x 355 mm (20.7 x 14 x 14 in.)
Net Weight (each)	7.8 kg
Shipping Weight	10.5 kg
Included Accessories	(2) wire nuts, (2) gland nuts, (1) right-angle screwdriver
Installer-Supplied Required Tools	22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.
Optional Accessories	22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.

	Control 88M	Control 28WH
Frequency Range (-10 dB)	47 Hz – 16 kHz	45 Hz to 20 kHz
Frequency Response (±3 dB)	60Hz - 15 kHz	62Hz - 16 kHz
Power Rating	240 W Continuous Program (2 hrs) 120W (480W peak), Continuous Pink Noise (2 hrs) 100W (400W peak) Continuous Pink Noise (100 hrs)	240 W Continuous Program (2 hrs) 120 W (480W peak), Continuous Pink Noise (2 hrs) 90 W (360W peak) Continuous Pink Noise (100 hrs)
Maximum Input Voltage	28.0 V	27.5 V RMS (2 hrs), 55.0 V peak
Maximum SPL (1m)	108 dB	112 dB ave. Continuous Pink Noise (118 dB peak)
Sensitivity	87 dB, 1W @ 1m (ave. 80Hz - 16kHz)	91 dB, 1W/1m (ave. 100 Hz – 10 kHz)
Directivity Factor (Q)	2.1	7.3 (averaged 1kHz – 16kHz)
Directivity Index (DI)	3.2 dB	8.3dB (averaged 1kHz – 16kHz)
Impedance	8Ω (at 8Ω setting)	8 ohms (THRU setting)
Crossover Type	2nd Order LPF on LF and 2nd Order HPF on HF	2nd order low-pass, 1st order high-pass, plus conjugate shaping
Transformer Taps	70V: 60W, 30W, 15W & 7.5W 100V: 60W, 30W, 15W	70V: 60W, 30W, 15W, 7.5W 100V: 60W, 30W, 15W Insertion Loss: <0.94 dB at any tap setting Thru Setting: 8Ω nominal
Recommended Protective High-Pass	45 Hz for 8Ω operation, 24 dB/oct 80 Hz for 60W tap, 24 dB/oct 50 Hz for 30W, 7.5W, and 7.5W taps, 24 dB/oct	45 Hz high-pass (24 dB/oct) for 8Ω operation plus 15W and 7.5W taps; 55 Hz for 30W tap; 65 Hz for 60W tap.
Drivers	LF: 200 mm (8.00 in) diameter LF driver, Kapton™ former, 38mm (1.5 in) voice coil, polypropylene cone and polyurethane surround. HF: 25mm (1.0 in) diameter HF driver Polyetherimide (PEI) dome.	LF: 200 mm (8 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure. HF: 25 mm (1 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
Enclosure	LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.	High Impact Polystyrene (HIPS) with 10% glass fill, painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.