Control 25AV

Name: JBL Professional Control 25AV
Brand: JBL Professional
SKU: CONTROL 25AV

Compact Indoor Outdoor Background Foreground Loudspeaker

KYAF code CONTROL 25AV

The Control® 25AV utilizes a deep cabinet, high power components and complex network to achieve extremely smooth high fidelity performance from a compact 2-way loudspeaker.

Continuous (RMS): 100 W; CONTINUOUS (RMS)
Peak power: –; PEAK POWER
Max SPL: 113 dB; MAX SPL
Frequency range: 70 Hz – 23 kHz; FREQUENCY RANGE

Request a quote Spec sheet PDF · 1.37 MB

Supplied and supported in Pakistan by KYAF, the official HARMAN Professional distributor.

AT A GLANCE

Specifications

100 W
Continuous (RMS): 113 dB
Max SPL: 70 Hz – 23 kHz
Frequency range: 100°H x 100°V
Coverage: 87 dB SPL, 1 W @ 1 m
Sensitivity: 8 ohms
Impedance: 4.0 kg
Weight: 236 x 186 x 159 mm
Dimensions

Frequency Range	70 Hz - 23 kHz (-10 dB)
Power Capacity	200 W Continuous Program Power; 100 W Continuous Pink Noise
Transformer Taps	70V: 60 W, 30 W, 15 W, 7.5 W 100V: 60 W, 30 W, 15 W
Sensitivity	87 dB SPL, 1 W @ 1 m (3.3 ft)
Midrange (±1.5 dB, typical)	130 Hz - 14 kHz
Coverage Angle	100°H x 100°V
Maximum SPL (1m)	113 dB continuous peak pink noise 107 dB continuous average pink noise 103 dB continuous average music or speech
Directivity Factor (Q)	4.9 dB, averaged 500 Hz to 4 kHz
Directivity Index (DI)	6.9 dB, averaged 500 Hz to 4 kHz
Impedance	8 ohms
Minimum Impedance	6.7 ohms at 230 Hz
Crossover Network	Second Order Low Pass, Second Order High Pass, Complex Optimization for Maximally Flat Response
Drivers	LF: 130 mm (5.25 in) polypropylene-coated paper with WeatherEdge surround, 25 mm (1 in) voicecoil on kapton former HF: 20 mm (.75 in) titanium coated PEI
Enclosure	High Impact polystyrene
Grille	Painted stainless steel, black or white to match cabinet, paintable
Overload Protection	Full-range power limiting to protect network and transducers. Internal fuse to protect during exceptional overload condition
Outdoor Capability	Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IEC 529 IP-X4 splashproof rating
Input Connectors	Screw-down terminal strip, zinc-plated copper base, nickel plated metal screws/washers, accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10), plus bare wire. (up to 12 AWG)
Safety Agency	Transformer is listed per UL1876
Colors	Black or white (-WH)
Rotation	Against wall on InvisiBall Base: 37° vertical 44° horizontal On bracket: 44° all directions
Dimensions (H x W x D)	236 x 186 x 159 mm (9.3 x 7.4 x 6.3 in)
Net Weight (each)	4.0 kg
Shipping Weight (ea)	9.0 kg per pair
Included Accessories	1 Pr MTC-PC input panel cover, InvisiBall mounting base, 6 mm x 100 mm InvisiBall hex wrench
Optional Accessories	MTC-25V: For vertical columnar orientation of up to 3 loudspeakers extension of the woofer surround that MTC-25/23H: For horizontal splaying of two speakers. Three brackets array up to six loudspeakers in a 360° array. MTC-28/25CM: Ceiling-mount adapter.
Mounting Hardware	InvisiBall™ aimable wall-mounting system included.

	Control 25AV	Control 29AV WH
Frequency Range	70 Hz - 23 kHz (-10 dB)	37 Hz –18 kHz (-10 dB)
Power Capacity	200 W Continuous Program Power; 100 W Continuous Pink Noise	300 W Continuous Program Power; 150 W Continuous Pink Noise
Transformer Taps	70V: 60 W, 30 W, 15 W, 7.5 W 100V: 60 W, 30 W, 15 W	70 V: 110 W, 55 W, 28 W & 14 W 100 V: 110 W, 55 W, & 28 W, Thru Position: 8 ohms nominal
Maximum SPL (1m)	113 dB continuous peak pink noise 107 dB continuous average pink noise 103 dB continuous average music or speech	Short-Term: 120 dB; Long-Term: 114 dB
Coverage Angle	100°H x 100°V	110°H x 85°V, Rotatable
Directivity Factor (Q)	4.9 dB, averaged 500 Hz to 4 kHz	7.2 dB, averaged 500 Hz to 16 kHz
Directivity Index (DI)	6.9 dB, averaged 500 Hz to 4 kHz	8.6 dB, averaged 500 Hz to 16 kHz
Impedance	8 ohms	8 ohms
Minimum Impedance	6.7 ohms at 230 Hz	6.3 ohms @ 230 Hz
Crossover Network	Second Order Low Pass, Second Order High Pass, Complex Optimization for Maximally Flat Response	3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency
Drivers	LF: 130 mm (5.25 in) polypropylene-coated paper with WeatherEdge surround, 25 mm (1 in) voicecoil on kapton former HF: 20 mm (.75 in) titanium coated PEI	LF: 200 (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voicecoil on fiberglass former HF: 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
Enclosure	High Impact polystyrene	High impact polystyrene
Grille	Painted stainless steel, black or white to match cabinet, paintable	Thermoset composite coated steel, WeatherMax multi-layer foam
Overload Protection	Full-range power limiting to protect network and transducers. Internal fuse to protect during exceptional overload condition	Full-range power limiting to protect network and transducers. Serviceable internal fuse to protect during exceptional overload conditions.

FOR DESIGNERS AND INSTALLERS

Downloads

JBL's own files, opened here on the KYAF site.

JBL Control 25AV — Control 25AV
Compact Indoor Outdoor Background Foreground Loudspeaker

DESIGN

Every part of the Control 25AV, labelled.

FEATURES

What the Control 25AV brings.

The Control® 25AV utilizes a deep cabinet, high power components and complex network to achieve extremely smooth high fidelity performance from a compact 2-way loudspeaker.