DriveRack PA2

Complete Loudspeaker Management System

control app for all 4 major OSes

Frequency range: 20 Hz – 20 kHz; FREQUENCY RANGE
Dynamic range: >110 dB; DYNAMIC RANGE
Weight: 2.4 kg; WEIGHT

Supplied and supported in Pakistan by KYAF, the official HARMAN Professional distributor.

AT A GLANCE

Specifications

20 Hz – 20 kHz
Frequency range: >110 dB
Dynamic range: 2.4 kg
Weight: >50 kohm
Impedance: 1.75”
Dimensions: (2) line inputs.
Inputs: > 45dB
CMRR: +15VDC
Mic Preamp Phantom Power

Input	(2) line inputs. (1) RTA Mic input
Input Connectors	(2) Female XLR line inputs. (1) Female XLR RTA Mic input
Input Type	Electronically balanced/RF filtered
Input Impedance	>50 kohm
A/D Converter	dbx Type IV™ Conversion System
CMRR	> 45dB
Mic Preamp Phantom Power	+15VDC (RTA)
Mic Preamp Equivalent Input Noise (EIN)	< -117dB, 22Hz-22kHz, 150 ohm (RTA)
Output	(6) Line Outputs
Output Connectors	Male XLR
Output Type	Electronically balanced, RF filtered
Output Impedance	120 Ω
Max Output	+20dBu
A/D Dynamic Range	112 dB A-weighted, 110 dB unweighted
Type IV Dynamic Range	123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW
Input Delay Length	100ms
Alignment Delay	10ms per channel (60ms total)
Sample Rate	48kHz
Dynamic Range	>110 dB A-weighted, >107dB unweighted
THD+Noise	0.003% typical at +4dBu, 1kHz, 0dB input gain
Frequency Response	20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk	< -110 dB, -120dB typical (input-to-output: < -100 dB)
Operating Voltage	100 – 120VAC 50/60 Hz - EU: 220 – 240 VAC 50/60 Hz
Power Consumption	22 W
Unit Weight	2.4 kg
Shipping Weight	3.1 kg
Dimensions	1.75” (H) x 5.75” (D) x 19” (W), 4.4cm (H) x 14.6cm (D) x 48.26cm (W)
D/A Dynamic Range	112 dB A-weighted, 110dB unweighted

	DriveRack PA2	DriveRack VENU360
Input	(2) line inputs. (1) RTA Mic input	(3) analog line inputs/(2) AES digital inputs (shared connectors), (1) RTA mic input
Input Connectors	(2) Female XLR line inputs. (1) Female XLR RTA Mic input	(3) female XLRs (2 selectable between analog/AES digital audio formats), (1) female XLR RTA mic input
Input Type	Electronically balanced/RF filtered	Electronically balanced/RF filtered
Input Impedance	>50 kohm	> 30 kΩ, balanced line to line
CMRR	> 45dB	> 50 dB @ 1 kHz
Output	(6) Line Outputs	(6) Line Outputs
Output Connectors	Male XLR	Male XLR
Output Type	Electronically balanced, RF filtered	Electronically balanced, RF filtered
Output Impedance	120 Ω	120 Ω, balanced line to line
Alignment Delay	10ms per channel (60ms total)	Up to 1000 ms per output channel
A/D Converter	dbx Type IV™ Conversion System	24-bit with dbx Type IV™ Conversion System
A/D Dynamic Range	112 dB A-weighted, 110 dB unweighted	117 dB A-weighted, 114 dB unweighted, 22 kHz BW
Type IV Dynamic Range	123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW	129 dB with transient material, A-weighted, 22 kHz BW; 126 dB with transient material, unweighted, 22 kHz BW; 121 dB typical with program material, A-weighted, 22 kHz BW
D/A Dynamic Range	112 dB A-weighted, 110dB unweighted	116 dB A-weighted, 113 dB unweighted, 22 kHz BW

FOR DESIGNERS AND INSTALLERS

Downloads

dbx's own files, opened here on the KYAF site.

dbx DriveRack PA2 — DriveRack PA2
Complete Loudspeaker Management System

DESIGN

Everything at the back of the box.

FEATURES

What the DriveRack PA2 brings.

control app for all 4 major OSes

The DriveRack® PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ™ and AFS™ algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android®, iOS®, Mac®, or Windows® device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.