COL600

COL600 Slim Column Loudspeaker

The JBL COL600 is an elegant 24-inch (600 mm) slim column loudspeaker that provides wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt to the aim, providing optimum coverage for most listening areas while allowing the speaker to be installed flat to the wall. The slim, compact design—winner of international design awards for industrial design excellence—complements virtually any architectural décor.

Continuous (RMS): 80 W; CONTINUOUS (RMS)
Peak power: 320 W; PEAK POWER
Max SPL: 111 dB; MAX SPL
Frequency range: 70 Hz – 20 kHz; FREQUENCY RANGE

Supplied and supported in Pakistan by KYAF, the official HARMAN Professional distributor.

AT A GLANCE

Specifications

80 W
Continuous (RMS): 320 W
Peak power: 111 dB
Max SPL: 70 Hz – 20 kHz
Frequency range: Vertical 110° [1kHz-4 kHz average]
Coverage: 86 dB
Sensitivity: 8Ω
Impedance: 3.5 kg each
Weight

Frequency Range (-10 dB)¹	70 Hz – 20 kHz
Frequency Response (±3 dB)	105 Hz – 20 kHz
Power Rating (8Ω setting)2	160W Continuous Program (2 hrs) 80W (320W peak) Continuous Pink Noise (2 hrs) 60W (240W peak) Continuous Pink Noise (100 hrs)
Sensitivity (2.83V @ 1m)	86 dB
Coverage Pattern	Vertical 110° [1kHz-4 kHz average]; 10° down-tilt to aiming access for+45°/-65° coverage in relation to physical cabinet aim Horizontal 160° [1kHz – 4 kHz average]
Directivity (Q)	7.8
Directivity Index (DI)	8.9 dB
Rated Maximum SPL	105 dB Continuous (111 dB peak) @ 1m
Nominal Impedance	8Ω (in Thru/direct mode)
Minimum Impedance	7.0 Ω@ 275 Hz
Transformer Taps	20W, 10W, 5W @ both 70V & 100V (plus 2.5W @ 70V), and 8Ω thru, selectable via switch
Transformer Insertion Loss	Less than 1 dB for all taps
Maximum Input Voltage	21 V RMS (2 hrs), 42 V peak
Recommended Protective High-Pass	70 Hz for 8 Ω operation; 60 Hz for all transformer tap settings (20W, 10W, 5W and 2.5W).
Drivers	Two 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers One 25 mm (1 in.) tweeter (tweeter located at top of array for better coverage of listening space)
Enclosure Material	PC + ABS, UL94-V0 flammability rating
Grille	Plated SPCC with polyester powder coat finish
Agency Ratings	Transformer UL recognized. RoHS, REACH compliance. LVD for CE.
Environmental Rating	IP-54 rated per IEC60529, dust and water protected when installed with included rain cover for input terminal compartment and no physical up-tilt cabinet aiming. UV resistant. [Cycle 1 per ISO 4892.3 – 2006]
Terminals	4-pin Euroblock connection for bare wire, accepts 24 to 14 AWG gauge wire (0.25 to 2.5 sq mm). Rain cover allows for one or two 2-wire cables, with max cable jacket diameter of 8 mm (0.3 in)
Insert Points	Back Panel : 2 threaded insert points for WALL BRACKET ; attaches via included M6 x 20 mm bolts, flat washers, & lock washers; plus 1 threaded insert point for secondary safety cable, M6 threaded x 20 mm deep. Top & Bottom Caps : 1 threaded insert point on each cap (top & bottom, 2 insert points total) for L-BRACKETS ; attach via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points AND remove pre-installed bolts holding end cap in place.) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), threaded insert is M6 x 28 mm deep.] Side Panels : 1 threaded insert point on each side (left and right, for 2 insert points total) for L-BRACKETS ; attach via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points.) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 22 mm deep.]
Mounting	Multiple mounting methods (see Installation Guide for more details): Included Swivel (Pan) / Tilt WALL BRACKET provides continuously variable ±95° degree Horizontal left-right swivel (pan) aiming (at 0° down-tilt); continuously adjustable +0°/-10° Vertical tilt (when no interference to wall); WALL and SPEAKER sections of WALL BRACKET ASSEMBLY attach together via included M6 x 12 mm bolts, flat washers, and lock washers. Two included L-brackets that can be positioned on either top & bottom insert points or side-side insert points. Top, bottom, and 2 side threaded insert points can be interfaced by installer for installer-supplied mounting methods. Installer responsible for safety of mounting method.
Dimensions (H x W x D)	598 x 102 x 93 mm (23.6 x 4.1 x 3.7 inches)
Net Weight	3.5 kg each
Shipping Weight	4.5 kg each (packed 1 speaker per carton)
Included Accessories	Low-profile Swivel (Pan) / Tilt WALL BRACKET; 2 x L-BRACKETS that can be positioned on top/bottom or side/side insert points.
SKU Numbers and Colors	JBL-COL600-BK (black, RAL9004), JBL-COL600-WH (white, RAL9016)

	COL600	COL800
Frequency Range (-10 dB)¹	70 Hz – 20 kHz	85 Hz – 20 kHz
Frequency Response (±3 dB)	105 Hz – 20 kHz	125 Hz – 18 kHz
Power Rating (8Ω setting)2	160W Continuous Program (2 hrs) 80W (320W peak) Continuous Pink Noise (2 hrs) 60W (240W peak) Continuous Pink Noise (100 hrs)	300W Continuous Program (2 hrs) 150W (600W peak) Continuous Pink Noise (2 hrs) 100W (400W peak) Continuous Pink Noise (100 hrs)
Sensitivity (2.83V @ 1m)	86 dB	88 dB
Coverage Pattern	Vertical 110° [1kHz-4 kHz average]; 10° down-tilt to aiming access for+45°/-65° coverage in relation to physical cabinet aim Horizontal 160° [1kHz – 4 kHz average]	Vertical 60° [1 kHz-4 kHz average]; 10° down-tilt to vertical aiming axis for +20°/-40° coverage in relation to physical cabinet aim Horizontal 160° [1 kHz – 4 kHz average]
Directivity (Q)	7.8	8.1
Directivity Index (DI)	8.9 dB	9.1 dB
Rated Maximum SPL	105 dB Continuous (111 dB peak) @ 1m	110 dB Continuous (116 dB peak) @ 1m
Nominal Impedance	8Ω (in Thru/direct mode)	8Ω (in Thru/direct mode)
Minimum Impedance	7.0 Ω@ 275 Hz	7.7 Ω@ 290 Hz
Transformer Taps	20W, 10W, 5W @ both 70V & 100V (plus 2.5W @ 70V), and 8Ω thru, selectable via switch	60W, 30W, 15W @ both 70V & 100V (plus 7.5W @ 70V), and 8Ω thru, selectable via switch
Transformer Insertion Loss	Less than 1 dB for all taps	Less than 1 dB for all taps
Maximum Input Voltage	21 V RMS (2 hrs), 42 V peak	33 V RMS (2 hrs), 66 V peak
Recommended Protective High-Pass	70 Hz for 8 Ω operation; 60 Hz for all transformer tap settings (20W, 10W, 5W and 2.5W).	75 Hz for 8 Ω operation; 60 Hz for all transformer tap settings (60W, 30W, 15W and 7.5W).

FOR DESIGNERS AND INSTALLERS

Downloads

JBL's own files, opened here on the KYAF site.

JBL COL600 — COL600
COL600 Slim Column Loudspeaker

DESIGN

Every part of the COL600, labelled.

FEATURES

What the COL600 brings.

A combination of stylish design and outstanding performance features makes the COL600 ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired.